Armson Sights

O.E.G Users Instructions
(Occluded Eye Gunsight)

The O.E.G. is a day gunsight for paintball and airgun use. These instructions must be followed to achieve the maximum benefit from this equipment.

The paintball sight is used with both eyes open at all times. The user must concentrate on the target when aiming.

Before loading the marker or zeroing the sight, the user must practice raising the marker and placing the spot on the target until he can do it quickly every time. This will save time and paintpellets when zeroing.

Zeroing Procedure

The small screw in the centre of each adjuster must be slackened slightly until the adjuster can be turned by hand.

Only the user must fire the weapon when zeroing. The sight cannot be zeroed by one person for another to use.

Stage 1: Rest the marker and line up the iron sights with the target, then without moving the marker raise the head and observe the position of the spot in relation to the target. Move the adjusters until the spot is also on the target.

Stage 2: At a range of approximately 15 metres the user raises the marker, places the spot on the target and fires immediately. Do not hold on aim. The sight is the adjusted up, down, left or right until the hits are in the centre of the target. The user may then move back 20 metres for final zeroing if required. When zeroing is complete, retighten the locking screw in the centre of the adjusters.


Note: Dry practice without firing is very beneficial and improves the user's skill without using paintpellets. Remember, you must fire immediately the spot is on the target. The faster the user shoots, the better the results.